Country CleansAll recipes
Home › Cleaning recipes
Recipe 69 of 100 · The Country Cleans Mix Book

Why Your Floor Is Still Sticky After Mopping

and the Reset Before Company Comes

Years of too much floor cleaner leave a tacky film. Window open, a fan blowing out, gloves on. Mix 1 gallon hot water, 2 cups 70% rubbing alcohol and 1 teaspoon dish soap, no more. Flood one 4 foot square, wait 5 minutes, scrub with a white pad, mop it up right away and rinse with plain water. Repeat where it's still tacky when dry. Keep everyone off the wet film and flames out of the room. Vinyl, LVP, tile and sealed concrete only.

Sticky Floor Residue Stripper recipe card: 1 gallon hot water, 2 cups 70% rubbing alcohol, 1 tsp dish soap, no more, 1 gallon plain water to rinse
What it fixesVinyl, LVP, ceramic tile, or sealed concrete that stays tacky and grabs at your socks no matter how many times you mop, from years of built-up cleaner residue and soap film.

You need

Mix it

  1. Open a window and put a fan in it blowing out. Alcohol vapor at this volume needs somewhere to go.
  2. Put on gloves.
  3. Combine the hot water and alcohol in the bucket.
  4. Add the single teaspoon of dish soap and stir gently. Resist adding more. Extra soap is what caused this problem in the first place.

Use it

  1. Clear the room and vacuum.
  2. Work in sections no bigger than four feet square, because this only works while it is wet.
  3. Flood the section, wait 5 minutes, then scrub with the white pad. You will see the old residue turn milky and lift.
  4. Mop the dirty liquid up right away and rinse that section with the plain water bucket before moving on.
  5. Repeat on any section that still feels tacky when dry. Heavy buildup usually needs two or three passes, not one harder one.
  6. Dump both buckets and rinse them.
Dale's noteBe clear about what this is. It is a cleaner residue and soap film reset, it takes off the tacky layer left by years of too much floor cleaner, and that covers most sticky floors. It is not a wax stripper. At roughly 8 percent alcohol in the bucket there is nowhere near enough solvent to dissolve acrylic mop-and- shine or a real wax coating. If your floor has actual polymer polish on it, and you can tell because it flakes at the edges or looks yellow and glossy in layers, that needs a commercial floor stripper, not a bucket recipe. Test a hidden spot first and let it dry before you commit to a room. Once the floor is reset, switch to the LVP cleaner for LVP or the tile and grout floor cleaner for tile and cut your soap way back.
Don'tKeep everyone out of the room while a section is flooded and do not walk on the wet film yourself. A soap and alcohol layer on tile or vinyl is more slippery than plain water. Do not use this on hardwood, laminate, or any natural stone. It is far too wet for wood and laminate seams, and the dwell time will dull polished stone. Keep open flame out of the room while the floor is wet, since a gallon of alcohol solution puts real vapor in the air.
The Country Cleans Mix Book

This is 1 of 100 mixes in the Mix Book

Glass, wood, bathrooms, mold, kitchens, carpet, couches, laundry, floors, metal, odors and more. Every one with the same exact amounts, steps and warnings. A PDF in your email within a minute.

GET THE MIX BOOK · $12.99
Free: Dale's Fall Deep-Clean Checklist

Free: Dale's Fall Deep-Clean Checklist

19 jobs to do before the house closes up for winter, room by room, plus 3 recipes printed in full. Print it and stick it on the fridge.

SEND ME THE FREE CHECKLIST

More homemade cleaning recipes

How to Keep the Bathroom Mirror From FoggingHow to Get Rid of a Toilet Ring Overnight Before Guests ComeHow to Clean the Oven After Thanksgiving Without Self CleanHow to Get the Turkey Smell Out of the Trash Can